12.7
Default G.SHDSL Module Settings
The default profile always exists and all of the G.SHDSL ports use the default profile settings when the network
module is shipped. The default profile's name is set to
12.7.1
Default G.SHDSL Module Profile Settings
The following are the settings of the default profile.
Name: DEFVAL
Profile Status: Active
Maximum: 2034 Kbps
Minimum: 192 Kbps
12.7.2
Other Default G.SHDSL Module Settings
The factory default settings for all G.SHDSL ports of the network module are
Encapsulation: RFC 1483
Multiplexing: LLC-based
VPI: 0
VCI: 33
Enable/Disable State: disabled
12.8
G.SHDSL Module Port Setup Screen
Click Port Setup in the navigation panel to open the Port Setup screen.
This screen is a summary screen that displays read-only information about the ports. Click a port's name to go to a
setup screen for that port.
G.SHDSL Module Port Setup
. The default profile can't be deleted.
DEFVAL
IES-1000 User's Guide
12-3