Table of Contents
Advertisement
Web Configurator with MSC
4.5
Saving Your Configuration
Click Apply in a configuration screen when you are done modifying the settings in that screen to save your changes
back to the switch.
4.6
Navigating the Web Configurator
The web configurator uses multiple levels. You only need to use one level for features that deal with the IES-2000
or IES-3000 as a whole. For example, to configure General Setup, click the link on the navigation panel to open
the configuration screen.
Features that are based on individual cards, for example Port Setup, require you to go down another level. Click
the link on the navigation panel, and then click the card's link (see Figure 4-4) to open the configuration screen.
LABEL
Slot ID
This is the slot number.
Module Type
Click a link in this column to go to the port setup screens for a card.
There may be yet more levels below to allow you to make more and more specific configurations, for example Port
Setup on the ADSL line card has screens that allow you to configure individual profiles and individual ports.
Configuration screens for individual cards display the card's slot number in front of the screens title in the upper
left hand corner of the screen (see Figure 4-5).
Many of the configuration screens that are based on individual cards have one or more links in the upper-right
corner. Click a link to go to the screen with the same name. For example, click Port Setup in the ALC Port Setup
screen (see Figure 4-5) to go to the general Port Setup screen (see Figure 4-4).
4-4
Figure 4-4 Select a Line Card
Table 4-3 Select a Line Card
DESCRIPTION
Web Configurator with MSC Introduction
Advertisement
Table of Contents
Troubleshooting
