Figure 10-3 Bridge Packet Type Filter Setup; Table 10-3 Bridge Packet Type Filter Setup - ZyXEL Communications IES-1000 User Manual

IES-1000 User's Guide
LABEL
MAC Count Filter
MAC Address
Record
IGMP Snooping
Record
DHCP Relay
802.1X
Fast Mode Setting
Fast Mode VLAN ID
10.4.1 Packet Type Filter Setup Screen
Click Packet Type Filter in the Bridge Setup screen to open this screen.
The following table describes this screen.
LABEL
Bridge Setup
Port Number
10-4
Table 10-2 Bridge Setup
Click this link to go to a screen for setting limits on how many MAC addresses may be
dynamically learned or statically configured on a port.
Click this link to show the filtering database for each port.
Click this link to show received multicast membership information for each port.
Click this link to go to a screen where you can configure DHCP relay settings.
Click this link to go to a screen where you can configure for IEEE 802.1X authentication.
Click this link to go to a screen for editing each port's VLAN ID (only in Fast Mode).

Figure 10-3 Bridge Packet Type Filter Setup

Table 10-3 Bridge Packet Type Filter Setup

Click this link to go to the Bridge Setup screen.
This field identifies the individual ports.
DESCRIPTION
DESCRIPTION
Getting Started Screens