Adsl Module Port Setup Screen - ZyXEL Communications IES-1000 User Manual

- Maximum Signal/Noise Ratio: 31 db
- Minimum Signal/Noise Ratio: 0 db
- Minimum Transmission Rate: 32 Kbps
- Maximum Transmission Rate: 2048 Kbps
Upstream ADSL settings:
- Latency Delay: 4ms
- Target Signal/Noise Ratio: 6 db
- Maximum Signal/Noise Ratio: 31 db
- Minimum Signal/Noise Ratio: 0 db
- Minimum Transmission Rate: 32 Kbps
- Maximum Transmission Rate: 512 Kbps
11.7.2 Other Default Settings
The factory default settings for all ADSL ports of the IES-1000 are
- Encapsulation: RFC 1483
- Multiplexing: LLC-based
- VPI: 0
- VCI: 33
- Enable/Disable State: disabled
- Operational mode: auto
11.8

ADSL Module Port Setup Screen

Click Port Setup in the navigation panel to open the Port Setup screen.
This screen is a summary screen that displays read-only information about the ports. Click a port's name to go to a
setup screen for that port.
ADSL Module Port Setup
IES-1000 User's Guide
11-3