Figure 11-5 Adsl Port Setup Edit; Table 11-6 Adsl Port Setup Edit - ZyXEL Communications IES-1000 User Manual

IES-1000 User's Guide
The following table describes this screen.
LABEL
Channel Setup Click this link to go to the port's Channel Setup screen.
Port Setup Click this link to go to the Port Setup screen.
Name Type a descriptive name to identify the port.
Active Select this check box to turn on this ADSL port. The ADSL ports are disabled by default
because an enabled but disconnected ADSL port generates more heat than an operating port.
Disable ADSL ports when they are not in use to minimize heat generation and enhance
reliability.
Default 802.1p Type the priority value (0 to 7) to add to incoming frames without a (IEEE 802.1p) priority tag.
Priority
Profile Use the drop-down list box to select a profile to assign to this port.
Mode Use the drop-down list box to select the ADSL operational mode for this port.
11-10

Figure 11-5 ADSL Port Setup Edit

Table 11-6 ADSL Port Setup Edit

DESCRIPTION
ADSL Module Port Setup