Figure 10-3 Database Edit Dialog; Figure 10-4 Enable Bootp/Tftp; Figure 10-5 Enter Debug Mode - ZyXEL Communications AES-100 User Manual

AES-100 User's Guide
Choose Normal Bootp to enable normal BOOTP/TFTP functions.
Step 8.
Restart the AES-100 and press any key within three seconds to get the following console window:
Step 9.
SDRAM Testing . . .
AES-100 Boot Loader, Feb 7 2001 12:06:03
Copyright © 2001 ZyXEL Communications Corp.
Mac address 00:A0:C5:12:34:56
Enter at the AES-100 boot console.
Step 10.
atnb
Wait for the firmware upload to finish.
Step 11.
Use the following command sequence on the AES-100 to write new firmware to flash memory.
Step 12.
-
192.168.1.1> flashfs
-
192.168.1.1 flashfs> wipe
-
192.168.1.1 flashfs> update
Wait for the update to complete and then restart the AES-100.
10-4

Figure 10-3 Database Edit Dialog

Figure 10-4 Enable BOOTP/TFTP

Figure 10-5 Enter Debug Mode

Firmware Upload