This chapter discusses the System Status, System Information and Console Port Speed, Log and Trace
24.1 Introduction
Select 24 in the main menu to open Menu 24 – System Maintenance, as shown next.
24.2 System Status
System status is a tool that can be used to monitor your VLC1012. System maintenance gives you information on
your system firmware version and the status/statistics of the ports. Similarly, Spanning Tree Protocol Status and
VLAN Status display STP and VLAN information
24.2.1
System Maintenance
Enter 24 from the main menu to go to Menu 24 – System Maintenance.
Step 1.
System Maintenance 1
Menu 24 — System Maintenance
1. System Status
2. System Information and Console Port Speed
3. Log and Trace
4. Diagnostic
5. Backup Configuration
6. Restore Configuration
7. Upload Firmware
8. Command Interpreter Mode
10. Time and Date Setting
11. Remote Management Control
12. Hardware Monitor
Enter Menu Selection Number:
Figure 24-1 Menu 24 – System Maintenance
Menu 24.1 - System Status
1. System Maintenance
2. Spanning Tree Protocol Status
3. VLAN Status
Press ENTER to Confirm or ESC to Cancel:
Figure 24-2 Menu 24.1 – System Status
System Maintenance 1
IES-2000/3000 User's Guide
Chapter 24
and Diagnostic SMT menus.
24-1