System Commands; Chapter 52 System Commands; Table 137 System Commands - ZyXEL Communications IES-1248-51V User Manual

C
H A P T E R
This chapter describes the system commands. Use the system commands to view
and change basic information about your IES.

52.1 System Commands

The following table describes the sys commands not described elsewhere in this
guide (see Chapter 63 on page 487

Table 137 System Commands

COMMAND
sys client disable <index>
sys client enable <index>
sys client set <index> <start-
ip> <end-ip> [[telnet] [ftp]
[web] [icmp] [snmp]]
sys client show
sys date set <yyyy mm dd>
sys date show
sys info contact <contact>
sys info hostname <hostname>
sys info location <location>
sys info show
sys log clear
sys log show
sys monitor disable
sys monitor enable
sys monitor extalm <index>
<name>
IES-1248-51V User's Guide

System Commands

for information on the sys snmp commands).
DESCRIPTION
Turns off a secure client.
Turns on a secure client.
Sets a secured client set: a range of IP
addresses from which you can manage the
device and the protocols that can be used.
Displays the device's secured client settings.
Sets the system's date.
Displays the system's current date.
Sets contact person information.
Sets the system name.
Sets location information.
Displays general system information.
Clears the device's logs.
Displays the device's logs.
Turns the hardware monitor off.
Turns the hardware monitor on.
Set external alarm name.
52
P
H/H
H/H
H/H
M/L
H/H
L/L
M/
H
M/
H
M/
H
L/L
H/H
M/L
H/H
H/H
H/H
405