Remote Management Screen; Figure 128 Remote Management (Secured Client Setup); Table 78 Remote Management (Secured Client Setup) - ZyXEL Communications IES-1248-51 User Manual

Table 77 Service Access Control (continued)
LABEL
Active
Server Port
Apply
Cancel

37.6 Remote Management Screen

Use this screen to configure the IP address ranges of trusted computers that may manage the
IES-1248.
To open this screen, click Advanced Application, Access Control, Secured Client.

Figure 128 Remote Management (Secured Client Setup)

The following table describes the labels in this screen.

Table 78 Remote Management (Secured Client Setup)

LABEL
Return
Index
Chapter 37 Access Control
DESCRIPTION
Select the Active check boxes for the corresponding services that you want to
allow to access the IES-1248.
For Telnet, FTP or web services, you may change the default service port by
typing the new port number in the Server Port field. If you change the default
port number then you will have to let people (who wish to use the service) know
the new port number for that service.
Click Apply to save your changes to the IES-1248's volatile memory. The IES-
1248 loses these changes if it is turned off or loses power, so use the Config
Save link on the navigation panel to save your changes to the non-volatile
memory when you are done configuring.
Click Cancel to begin configuring this screen afresh.
DESCRIPTION
Click Return to go back to the previous screen.
This is the client set index number. A "client set" is a group of one or more
"trusted computers" from which an administrator may use a service to manage
the IES-1248.
IES-1248-51/51A/53 User's Guide
243