Remote Management Screen; Figure 126 Remote Management (Secured Client Setup); Table 80 Remote Management (Secured Client Setup) - ZyXEL Communications IES-1248-51V User Manual

Hd digital surveillance monitor

Hide thumbs Also See for IES-1248-51V:

Table of Contents

Chapter 37 Access Control

Table 79 Service Access Control (continued)

37.6 Remote Management Screen

Use this screen to configure the IP address ranges of trusted computers that may

manage the IES.

To open this screen, click Advanced Application > Access Control > Secured

The following table describes the labels in this screen.

Click Apply to save your changes to the IES's volatile memory. The

IES loses these changes if it is turned off or loses power, so use the

Config Save link on the navigation panel to save your changes to the

non-volatile memory when you are done configuring.

Click Cancel to begin configuring this screen afresh.

Click Return to go back to the previous screen.

This is the client set index number. A "client set" is a group of one or

more "trusted computers" from which an administrator may use a

service to manage the IES.

Select this check box to activate this secured client set. Clear the

check box if you wish to temporarily disable the set without deleting

IES-1248-51V User's Guide