Table of Contents
Advertisement
1.800.561.8187
There are 4 available trigger modes in the [LIST MEAS]
page.
Trigger Modes
Function
INT
source.
MAN
Trigger by pressing the trigger button.
EXT
Trigger by sending a signal to the
trigger pin on the handler interface.
BUS
Trigger by the RS-232/USB port.
Displays the selected measurement range for each
measurement step; this field is here only for display, its
measurement range; it can be done in the
[MEAS DISPLAY] or [MEAS SETUP] function.
The T3LCR has an internal data buffer that record up to
10000 measurement readings. These readings can be
saved to an external USB drive in a .csv file format.
These readings can then be opened on a PC using
software such as Windows Excel. When the LOG
function is active, the display is fixed to the [MEAS
DISPLAY] screen. The [FUNC], [FREQ] and [LEVEL]
settings are also fixed and cannot be changed.
Step 1.
Press the [LIST MEAS] soft-key.
Step 2.
Use the cursor keys to select the [LOG] status
field.
Step 3.
Use the [START LOG] soft-keys to start a
new log.
Soft-key
Function
START LOG
To start a new measurement log.
Step 4.
After a new log has started, the measurement
readi
internal buffer. The options in the following
table are available during this recording
process:
www.
.com
T3LCR Series User Manual
you need to change the
45
information@itm.com
Advertisement
Table of Contents
