Teledyne T3LCR1002 User Manual page 73

1.800.561.8187
Soft-key Function
LF Set up the EOL to LF(0Ah).
CR Set up the EOL to CR(0Dh).
CR+LF Set up the EOL to CR+LF(0D 0Ah).
If handshaking is turned on, the meter will return the
commands it received from the PC first before returning
the result string of the command.
Example: PC sends idn?
The meter returns:
idn? T3LCR1300 RevC1.0
Step 1. Press the [Measure] or [Setup] key.
Step 2. Press the [SYSTEM] bottom soft-key.
Step 3. Use the cursor key to select the
[HAND SHAKE] field.
Step 4. Use the soft-keys to set the handshake setting.
Soft-key Function
OFF Turn off the Hand Shake feature.
ON Turn on the Hand Shake feature.
If the error code setting is set to on, the meter will return
error codes if the wrong command or an invalid
command is received to help you to debug your control
program.
"*E00", //No error
"*E01", //"Bad command",
"*E02", //"Parameter error",
"*E03", //"Missing parameter",
"*E04", //"buffer overrun",
"*E05", //"Syntax error",
"*E06", //Invalid separator",
"*E07", //"Invalid multiplier",
"*E08", //"Numeric data error",
www. .com
T3LCR Series User Manual
71
information@itm.com