Table of Contents
Advertisement
1.800.561.8187
You must configure the nominal value when you use
tolerance mode as the limit mode for the primary
parameter.
In sequential mode the nominal value does not affect
sorting. In sequential mode, you do not need to configure
the nominal value.
Step 1.
Press the [Setup] key.
Step 2.
Press the [BIN SETUP] soft-key.
Step 3.
Use the cursor key to select [NOM] field.
Step 4.
Enter the nominal value using the entry keys.
Use the soft-key to select the unit.
The beep feature behaves differently depending on
which beep mode is in effect.
Step 1.
Press the [Setup] key.
Step 2.
Press the [BIN SETUP] soft-key.
Step 3.
Use the cursor key to select [BEEP] field.
Step 4.
Use the soft-keys to set beep feature.
Soft-key
Function
OFF
Turns the beep feature off
PASS
Beep when the comparator sorting
result is OK
FAIL
Beep when the comparator sorting
result is NG
T3LCR series specify nine bins (1-BINS to 9-BINS).
Step 1.
Press the [Setup] key.
Step 2.
Press the [BIN SETUP] soft-key.
Step 3.
Use the cursor key to select [#-BINS] field.
Step 4.
Use the soft-keys to select beep tone.
www.
.com
T3LCR Series User Manual
61
information@itm.com
Advertisement
Table of Contents
