Teledyne T3LCR1002 User Manual page 62

60
1.800.561.8187
Includes the point
Excludes the point
In Sequential mode, the comparison limit values are
based on the absolute value of the measurement. The
nominal value does not need to participate in operation.
Step 1. Press the [Setup] key.
Step 2. Press the [BIN SETUP] soft-key.
Step 3. Use the cursor key to select [MODE] field.
Step 4. Use the soft-keys to select comparator mode.
Soft-key Function
ABS Absolute parameter values
PER Deviation percentages
SEQ Sequential mode
www. .com
Setup Key
information@itm.com