Teledyne T3LCR1002 User Manual page 19

T3LCR Series User Manual
There is a maximum of 10 points.
Test frequency, test voltage, test current.
The comparator function enables you to set one pair of
lower and upper limits for each measurement point.
You can select from:
Judge with the first sweep parameter/Judge with the
second parameter/Not used for each pair of limits.
Up to 10 setup conditions can be written to/read from
the built-in non-volatile memory.
The front panel keys can be locked.
Complies with SCPI.
Universal serial bus jack, type-A (4 contact positions,
contact 1 is on your left); female; for connection to USB
memory devices only.
USB disk type: Flash disk only.
Format: FAT / FAT32 / exFAT.
Max memory size: 128GB.
17
1.800.561.8187 information@itm.com
www. .com