The :COMParator:BEEP command sets beep mode of the comparator
function.
The :COMParator:OPEN command selects the open condition for main
parameter.
116
1.800.561.8187
A suffix multiplier can be used with this command.
Example
SEND> COMP:SLIM 0.0001,0.0010<NL>
Query Syntax
COMParator:SLIM?
COMParator:secondary?
Query Response
<NR3:low limit>,<NR3:high limit>
Example
SEND> COMP:SLIM?<NL>
RET>
Command
COMParator:BEEP {OFF,PASS,FAIL}
Syntax
Parameter
Where,
OFF
PASS
BIN9).
FAIL
Example
SEND> COMP:BEEP PASS<NL>
Query Syntax
COMParator:BEEP?
Query Response
{OFF,PASS,FAIL}
Example
SEND> COMP:BEEP?<NL>
RET>
Command
COMParator:OPEN {OFF,2,5,10,20,50}
Syntax
Parameter
Where,
OFF
2,5,10,20,50
Example
SEND> COMP:OPEN 2<NL>
Query Syntax
COMParator:OPEN?
Query Response
{OFF,2,5,10,20,50}
Example
SEND> COMP:OPEN?<NL>
RET>
www.
1.00000e-04,1.00000e-03<NL>
Turns the beeper off.
Sounds a beep when the test is passed (BIN1-
Sounds a beep when the test is failed (OUT).
OFF<NL>
Turns the beeper off.
The percent range value
OFF<NL>
.com
Command Reference
information@itm.com