The CORRection:SHORt:STATe command sets the SHORT correction
function to ON or OFF.
The CORRection:SHORt:LCR command execute all preset SHORT
correction data measurement points (AC).
The CORRection:SHORt:DCR command execute all preset SHORT
correction data measurement points (DC).
The CORRection:SPOT:STATe command sets the SOPT correction function
to ON or OFF.
1.800.561.8187
Command
CORRection:SHORt:STATe {ON,OFF or 1,0}
Syntax
Parameter
ON, 1
OFF,0
Example
SEND> CORR:SHOR:STATe ON<NL>
RET>
Query Syntax
CORRection:SHOR:STATe?
Query Response
{on,off}
Example
SEND> CORR:SHOR:STATe?<NL>
RET>
Command
CORRection:SHORt:LCR
Syntax
Example
SEND> CORRection:SHORt:LCR<NL>
RET>
Command
CORRection:SHORt:DCR
Syntax
Example
SEND> CORRection:SHORt:DCR<NL>
RET>
Command
CORRection:SOPT:STATe {ON,OFF or 1,0}
Syntax
Parameter
ON, 1
OFF,0
Example
SEND> CORR:SPOT:STATe ON<NL>
RET>
www.
Set up the function is ON
Set up the function is OFF
null
on<NL>
LCR short<NL> // Run
pass/fail<NL> //Finish or Undone
DCR short<NL> // Run
pass/fail<NL> //Finish or Undone
Set up the function is ON
Set up the function is OFF
null
.com
T3LCR Series User Manual
121
information@itm.com