Teledyne T3LCR1002 User Manual page 72

70
1.800.561.8187
Soft-key Function
1200 Sets the baud rate to 1200.
9600 Sets the baud rate to 9600.
38400 Sets the baud rate to 38400.
57600 Sets the baud rate to 57600.
115200 Sets the baud rate to 115200.
Selection the interface for PC/PLC remote control.
Soft-key Function
RS232 Select RS-232 port as remote control
USB Select USB port as remote control
For other setting items about remote control mode,
After the device detects the signal change on RS-232 or
USB interface, the device will immediately communicate
with the host at the setting serial transmission rate, and
the keyboard will be locked as well.
In order to be able to communicate correctly, please
confirm whether the setting serial transmission rate and
able to communicate with host computer correctly.
The command terminator EOL uses the ASCII Line
Feed character by default. (LF, Decimal 10, Hex 0x0A, or
\
The EOL of the command and the EOL of the
command return data are the same.
The terminator (EOL) can change the three types:
1. LF (Line feed, Hex 0x0A).
2. CR (Carriage Return, Hex 0x0D).
3. CR+LF.
The T3LCR PC software only supports LF types.
www. .com
System Configurations
89.
information@itm.com