System:code; System:keylock; Idn; Trg - Teledyne T3LCR1002 User Manual

SYSTem:KEYLock command unlocks the keypad.
SYSTem:RESult command selects the test results send mode.
The *IDN? query returns the instrument ID.
The *TRG command (trigger command) performs the same function as the
Group Execute Trigger command.
1.800.561.8187
Query Syntax

SYSTem:CODE?

Query Response {on,off}
Example SEND> SYST:CODE?<NL>
RET>
Command SYST:KEYLOCK OFF
Syntax or UNLOCK(UNLK)
Example SEND> UNLOCK<NL>
Command
SYSTem:RESult {fetch,auto}
Syntax
Example SEND> SYST:RES fetch<NL>
Parameter Where,
fetch
auto
Query Syntax SYSTem:RESult?
Query Response {FETCH,AUTO}
Example SEND> SYST:RES? <NL>
RET>
Query Syntax IDN? Or *IDN?
Query Response <model>,<firmware>,<serial no.>,<manufacturer>
Command

*TRG

Syntax
Query Response <primary value>,<secondary value>,<comparator
result>
Example SEND> *TRG
RET>
www.
OFF<NL>
The test results will be sent back by command
.
The results will be sent back by one trig.
fetch<NL>
+5.56675e-11,+7.25470e-01,OUT
.com
T3LCR Series User Manual
127
information@itm.com