Teledyne T3LCR1002 User Manual page 48

46
1.800.561.8187
Soft-key Function
SAVE & STOP Stops the recording and saves the
recorded readings in the internal
buffer to an external USB flash drive.
The internal buffer will be cleared
after the save operation.
If an external USB flash drive is not
plugged in, the meter will not stop the
ongoing recording.
CLEAR & Stop recording and clears the internal
STOP buffer.
Step 5. When th
be added after the number of recorded
counts(in the [LOG] status field). The
following two operations are available in this
situation:
Soft-key Function
SAVE TO USB Saves the recorded readings in the
buffer to an external USB flash drive.
The internal buffer is cleared after this
operation.
CLEAR Clears the internal buffer.
BUFFER
Before saving the recorded readings in the internal buffer
to the external USB flash drive, remember to plug the
external USB drive into the USB port on the front panel.
The recorded readings will be saved in a subdirectory
named LIST DATA, whose parent directory will have
the same name as the T3LCR model being used. See the
example in below:
Example: F:\T3LCR1300\LIST DATE\LIST0000.CSV
Up to 9999 recording files can be saved, with their file
names from 0001.csv-9999.csv.
The size of the internal buffer can be adjusted in
setting field. The maximum data buffer size is 10000.
www. .com
Measure Key
information@itm.com