Teledyne T3LCR1002 User Manual page 20

Overview
After a USB disk has been inserted into the USB host
port of the LCR meter and if the meter detects that the
Ready. Press <Enter> to save screen. on the lower part
of the LCD screen.
If the keypad is not needed to enter a numeric value, a
and saved to the USB disk by depressing the Enter key. If
the screen shot is saved successful
be shown in the message area at the bottom of the
screen. The location and name of the screenshot will also
be shown, for example:
F:\T3LCR1300\Screen\ScreenShot001.bmp.
18
1.800.561.8187 information@itm.com
www. .com