This chapter provides the following information to remotely control the
T3LCR Series via the RS-232 or USB:
The device uses the RS-232 interface or USB interface to communicate with
the computer to complete all
commands, users can easily create various acquisition system which are
suitable for themselves.
1.800.561.8187
RS-232 Interface
USB Interface
Install USB Driver
You can connect a controller (i.e. PC and PLC) to the
RS-232 interface using a TELEDYNE RS-232 DB-9
cable. The serial port uses the transmit (TXD), receive
(RXD) and signal ground (GND) lines of the RS-232
standard. It does not use the hardware handshaking lines
CTS and RTS.
www.
functions. With standard SCPI
information@itm.com
.com
T3LCR Series User Manual
89