Table of Contents
Advertisement
1.800.561.8187
Key tone settings.
Step 1.
Press the [Measure] or [Setup] key.
Step 2.
Press the [SYSTEM] bottom soft-key.
Step 3.
Use the cursor key to select the [KEY BEEP]
field.
Step 4.
Use the soft-keys to set the beep settings.
Soft-key
Function
ON
Turn on the key beep feature.
OFF
Turn off the key beep feature.
Before you can control the T3LCR Series remotely via
the built-in RS-232/USB controller, you have to
configure the RS-232 RS-232/USB baud rate.
The T3LCR built-in RS-232/USB interface uses the
SCPI language.
RS-232/USB configuration is as follows:
Data bits: 8-bit
Stop bits: 1-bit
Parity:
none
Step 1.
Press the [Measure] or [Setup] key.
Step 2.
Press the [SYSTEM] bottom soft-key.
Step 3.
Use the cursor key to select the [BAUD] field.
Step 4.
Use the soft-keys to select the baud rate.
www.
.com
T3LCR Series User Manual
69
information@itm.com
Advertisement
Table of Contents
