Level:mode - Teledyne T3LCR1002 User Manual

Note
The LEVel:ALC or AMPlitude:ALC command enables the Automatic Level
Control (ALC).
Command
Syntax
Parameter
Example
Query Syntax
Query Response
Example
Note
The LEVel:MODe? query returns the level mode.
Query Syntax
Query Response
Example
108
1.800.561.8187
The suffix unit
This command CANNOT be used in LIST SWEEP.
DISPLAY page and CORRECTION page.
LEVel:ALC {on,1,off,0}
AMPlitude:ALC {on,1,off,0}
{on,1,off,0}
Where,
on (1) Enable ALC
off(0) Turn off the ALC.
SEND> LEV:ALC on<NL>
LEV:ALC?
or AMP:ALC?
{on,off}
SEND> LEV:ALC?<NL>
RET> off<NL>
This command CANNOT be used in LIST MEAS page ,
CORRECTION page and DCR mode.

LEVel:MODe?

{volt, curr}
SEND> LEVel:MODe?<NL>
RET> volt
www. .com
Command Reference
information@itm.com