Teledyne T3LCR1002 User Manual page 74

72
1.800.561.8187
"*E09", //"Value too long",
"*E10", //"Invalid command"
"*E11", //"Unknown error"
Step 1. Press the [Measure] or [Setup] key.
Step 2. Press the [SYSTEM] bottom soft-key.
Step 3. Use the cursor key to select the
[ERROR CODE] field.
Step 4. Use the soft-keys to set the error code setting.
Soft-key Function
OFF Turn off the Error Code feature.
ON Turn on the Error Code feature.
www. .com
System Configurations
information@itm.com