Table of Contents
Advertisement
When you notice any of the unusual conditions listed below, immediately
terminate operation and disconnect the power cable.
Please contact the TELEDYNE service center representative for repair of the
instrument. If you continue to operate without repairing the instrument, there
is a potential fire or shock hazard for operators.
The instrument is operating abnormally if:
The following general safety precautions must be observed during all phases
of operation, service, and repair of this instrument. Failure to comply with
these precautions or with specific WARNINGS elsewhere in this manual may
impair the protection provided by the equipment. In addition it violates safety
standards of design, manufacture, and intended use of the instrument.
1.800.561.8187
Warning
Dangerous
The instrument emits abnormal noise, smell, smoke, or a spark-like light
during the operation.
The instrument generates high temperature or electrical shock during
operation.
The power cable, plug, or receptacle on the instrument is damaged.
Foreign substances or liquid has fallen into the instrument.
www.
TELEDYNE assumes no liability for the
customer's failure to comply with these
requirements.
To avoid electric shock hazards, the instrument
chassis and cabinet must be connected to a safety
earth ground by the supplied power cable with
earth blade.
Do not operate the instrument in the presence of
inflammable gasses or fumes. Operation of any
electrical instrument in such an environment
constitutes a definite safety hazard.
.com
T3LCR Series User Manual
information@itm.com
i
Advertisement
Table of Contents
