Table of Contents
Advertisement
62
1.800.561.8187
Soft-key
Function
1-BINS
Set to 1 bin
2-BINS
Set to 2 bins
3-BINS
Set to 3 bins
4-BINS
Set to 4 bins
5-BINS
Set to 5 bins
6-BINS
Set to 6 bins
7-BINS
Set to 7 bins
8-BINS
Set to 8 bins
9-BINS
Set to 9 bins
T3LCR Series built-in comparator can sort DUTs into a
maximum 10 levels (Bin1 through Bin9 and OUT) using
up to nine sets of primary parameter limits along with
one set of secondary parameter limits.
Step 1.
Press the [Setup] key.
Step 2.
Press the [BIN SETUP] soft-key.
Step 3.
Use the cursor key to select [BIN 1 LOWER]
field
Step 4.
Enter the limit value using the entry keys.
When in the ABS and SEQ mode, please enter
the unit using the soft-keys. When in the PER
mode, the unit is %.
Step 5.
Repeat Step 4 using the cursor keys until you
have entered all limit values.
Step 6.
Use the cursor key to select [2nd LOWER]
field and enter the lower limit value for the
secondary parameter.
Step 7.
Select [2nd UPPER] field to enter the upper
limit value.
When the [Setup] key and the [BIN MEAS] soft-key is
pressed, the [BIN MEAS] page appears. The bin sorting
results are displayed in larger characters while the
measurement results are shown in normal characters.
www.
.com
Setup Key
information@itm.com
Advertisement
Table of Contents
