*SAV = FILE:SAVE
The *SAV command saves all user settings into the currently used file.
*RCL = FILE:LOAD
The *RCL command recalls all user settings from the currently used file.
128
1.800.561.8187
Note
This command can be used in BUS trigger mode.
*TRG = TRIG;:FETC?
Command
*SAV
Syntax
Example
SEND> *SAV<NL>
Command
*RCL
Syntax
Example
SEND> *RCL<NL>
www.
information@itm.com
.com
Command Reference