Teledyne T3LCR1002 User Manual page 28

26
1.800.561.8187
To achieve the best measurement result, it is
recommended to set the impedance range mode to
When using
measurement results may occur if the measured value
exceeds the full scale of the selected range.
Mode Function
overview
Auto T3LCR Series
Range sets the
optimum
impedance
range for the
impedance of
the DUT
Hold Measurement No ranging
Range
Nominal T3LCR Series
Range sets the
optimum range
depending on
the nominal
value
The hold range has nine impedance ranges: 10, 30, 100,
300, 1k, 3k, 10k, 30k and 100k.
The impedance range is selected according to the
impedance even if the measurement parameter is
capacitance or inductance.
www. .com
Measure Key
Advantage Disadvantage
The
need to select measurement
range time is longer
due to the
ranging time
You need to
time is select a proper
required range
depending on
the value of
the DUT.
Valid only in
need to select the sorting
range. No mode
ranging time is
required
information@itm.com