Fetch:impedance; Fetch:main; Fetch:monitor - Teledyne T3LCR1002 User Manual

The FETCh:IMPedance? query sets the latest measurement data of the
primary parameter, secondary parameter, monitor1 and monitor2 results into
the output buffer.
Query Syntax
Query Response
Example
The FETCh:MAIN? query sets the latest measurement data of the primary
and secondary parameters.
The FETCh:MONitor1? and FETCh:MONitor2 set the latest measurement
data of the moniter1 and moniter2 parameters into the output buffer.
The FETCh:MONitor? sets the latest measurement data of the moniter1 and
moniter2 parameters into the output buffer.
1.800.561.8187

FETCh:IMPedance?

<NR3:primary value>,<NR3:secondary value>,
<NR3:monitor1>,<NR3:monitor2>,<comparator
result>
SEND> FETC:IMP?<NL>
RET>
+0.00000e+00,BIN1,AUX-OK, OK<NL>
RET>
Comp on.
Query Syntax

FETCh:MAIN?

Query Response <NR3:primary value>,<NR3:secondary value>
Example SEND> FETC:MAIN?<NL>
RET>
RET>
Query Syntax FETCh:MONitor1? and FETCh:MONitor2?
Query Response <NR3: moniter1/2 value>
Example SEND> FETC:MON1?<NL>
RET>
RET>
OFF
Query Syntax

FETCh:MONitor?

Query Response <NR3: moniter1/2 value>
Example SEND> FETC:MON?<NL>
RET>
(0: The monitor 2 is OFF)
www.
+2.61788e-11,+5.45442e-01,+3.88651e+05,
+1.23434e+05,BIN1,OK<NL>//DCR &
+2.02100e-11,+1.64422e-01<NL>//LCR
Primary,Secondary
+1.23434e+05<NL>//DCR
+3.88651e+05<NL>
+0.00000e+00<NL>//0: The monitor 1 is
+3.88651e+05,+0.00000e+00<NL>
.com
T3LCR Series User Manual
111
information@itm.com