Teledyne T3LCR1002 User Manual page 13

1.800.561.8187
If an abnormality is detected, contact the company and
transport the meter to your nearest TELEDYNE sales or
service office. Save the packing box, shock-absorbing
material, and packaged items as you received them in case
you need to mail the instrument to an authorized
TELEDYNE distributor or service center.
Set up the T3LCR Series where the following
environmental requirements are satisfied.
Operating Environment
Ensure that the operating environment meets the
following requirements:
Temperature:
Temperature range
at calibration:
Humidity:
Altitude:
To prevent electrical shock, disconnect the T3LCR Series
power cable from the receptacle before cleaning. Use a
dry cloth or a cloth slightly dipped in water to clean the
casing. Do not attempt to clean the T3LCR Series
internally.
www. .com
T3LCR Series User Manual
0ºC to 50ºC
23ºC±5ºC (<1ºC deviation from the
temperature when performing
calibration)
<70% at wet bulb temperature
-condensation)
0 to 2000m
information@itm.com
11