Teledyne T3LCR1002 User Manual page 55

1.800.561.8187
Step 1. Press the [Setup] key.
Step 2. Use the cursor key to select [MON 1] or
[MON 2] field.
Step 3. Use the soft-keys to select DC bias voltage.
Soft-key Function
OFF Turn off the monitor
Z Absolute value of impedance
D Dissipation factor
Q Quality factor(=1/D)
Vac Test signal Voltage
Iac Test signal Current
Absolute deviation value
Relative deviation value
r Phase radian
d Phase angle
R Resistance (=Rs)
X Reactance
G Conductance
B Sustenance
Y Absolute value of admittance
This setting decides how long the meter will wait to
commence a measurement after the trigger signal is
received. Settable range: 0ms to 60s.
The automatic level control (ALC) feature adjusts the
voltage across the DUT or the current through the DUT
to match the voltage/current level setting. Using this
feature, you can try to ensure a constant signal level
(voltage or current) is applied to the DUT.
www. .com
T3LCR Series User Manual
53
information@itm.com