Teledyne T3LCR1002 User Manual page 37

1.800.561.8187
The T3LCR OPEN correction capability cancels
errors due to the stray admittance (G, B) in parallel with
the device under test (Refer to Figure 4-3).
The OPEN correction data is taken at all preset
frequency points, independent of the test frequency you
set. Refer to the tables on page 130 for the trimming
frequency point lists for each model.
Step 1. Press the [Measure] key.
Step 2. Press the [OPEN SHORT] soft-key.
Step 3. Use the cursor key to select the [OPEN] field.
Soft-key Function
ON Enables open correction.
www. .com
T3LCR Series User Manual
35
information@itm.com