Overhaul - Edwards GXS Series Instruction Manual

2. Check that all the connections are secure, tighten any loose connections. Inspect
all cables, pipelines, hoses and connections and check that they are not corroded
or damaged and do not leak, repair or replace any pipelines, hoses and
connections that are corroded or damaged, or which leak.
3. Refit the enclosure side and top panels.
For the areas with hard water or sites with the poor cooling water quality it may be
necessary to clean the cooling water pipes to prevent blockages and reductions in
cooling efficiency. The equipment and chemicals for pipe cleaning are commercially
available. Contact us for more information.

5.5 Overhaul

WARNING:
Do not attempt to overhaul the pump without our training and tooling.
We provide a full range of overhaul options worldwide. We can provide training, tooling
and spares to enable the users to overhaul their pumping systems. Contact us for more
information.
M58800880_H - Maintenance
Page 73