Changing The Dry Pump Speed During The Clean Operation; Changing The Clean Cycle Time; Figure 64 Dry Pump Clean Pdt Menu Configuration Items - Edwards GXS Series Instruction Manual

Figure 64 Dry pump clean PDT menu configuration items

9.9.1 Changing the dry pump speed during the clean operation

Use the Set DP speed menu item to change the dry pump speed during the clean cycle.
It is not recommended to increase the pump speed if solvent is used. If the dry pump
clean is just using air then setting the speed to 110 Hz would increase the efficiency of
the cleaning cycle.

9.9.2 Changing the clean cycle time

The time period for the dry pump clean cycle can be changed using the DP clean time
menu item.
M58800880_H - Pump display terminal
Page 143