Warm Up Options Menu; Booster Pump Start Options Menu - Edwards GXS Series Instruction Manual

Table 34 Set sequences menu
Option
Warm up sequence
Booster start options
Micro TIM options
Dry pump clean
Allow pump to go
on‑process when in warning
Ramped speed up
on‑process
PID pressure control setup
Smart shutdown
Speed control options
Reset MicroTIM
Restore factory defaults
Press the UP/DOWN keys to select the new settings and press ENTER to accept or
CANCEL to exit back to the Set sequences menu.

9.4.7 Warm up options menu

Scroll by pressing the UP/DOWN keys. Press ENTER to open a sub menu or CANCEL to
exit back to the Set sequences menu.
Table 35 Warm up options menu
Option
Warm up Temperature set
point
Auto Green Mode
Allow Cold on-process
Inlet purge on during warm up
Automatically re‑warm when
in Green Mode
* Scroll through the options by pressing the UP/DOWN keys. Press ENTER to accept the
new setting. Press CANCEL to exit back into the Warm up options menu.
Press the UP/DOWN keys to select enable/disable and press ENTER to accept or CANCEL
to exit back to the Warm up options menu.

9.4.8 Booster pump start options menu

Scroll by pressing the UP/DOWN keys. Press ENTER to open a sub menu or CANCEL to
exit back to the Set sequences menu.
M58800880_H - Pump display terminal
Text on PDT line 2
Warmup options...
BP Start Options...
Micro TIM...
DP Clean...
WarnOnProcess...
OnProcessRamp...
PID...
Smart Stop...
Speed Control...
Reset MicroTIM...
Default Reset...
Text on PDT line 2
Setpoint temp...
Auto Green Mode...
ColdOnProcess...
Inlet Purge...
Auto Rewarm...
Page 125
Options on PDT line 2 after
pressing Enter
See Warm up options menu
See Booster Pump Start options
menu
See Micro TIM menu
See Dry Pump Clean menu
Enable/Disable
See on-process Ramp menu
See PID menu
See Smart Stop menu
See Speed Control menu
See Reset MicroTIM menu
See Default Reset menu
Options on PDT line 2 after
pressing Enter
Range 0-210 °C*
Enable/Disable
Enable/Disable
Enable/Disable
Enable/Disable