Inspect The Connections, Pipelines, Cables And Fittings; Figure 14 Location Of The Oil Sight Glass And The Fill Plug On End Cover; Figure 15 Location Of The Oil Sight Glass And The Fill Plug On Gearbox - Edwards GXS Series Instruction Manual

3. Keep adding oil until the oil level is in line with the MAX indicator.
4. Refit the oil fill plug.
5. Refit all dry pumping system side panels.

Figure 14 Location of the oil sight glass and the fill plug on end cover

1. Oil filler plug 1. Oil filler plug

Figure 15 Location of the oil sight glass and the fill plug on gearbox

1. Oil filler plug 1. Oil filler plug
If the oil is very old or has light contamination then it is possible to replace the oil,
contact us for more information.

5.4.2 Inspect the connections, pipelines, cables and fittings

Depending on the application, inspection and cleaning of the exhaust pipe and any
elbows or check valves fitted may be needed. Contact us for details and training. If the
dry pumping system is not relocated for maintenance, ensure that all supplies are locked
out and tagged out before starting the following procedure.
1. Remove the enclosure side and top panels.
M58800880_H - Maintenance
Page 72
2. Oil sight glass 2. Oil sight glass
2. Oil sight glass 2. Oil sight glass