Microtim Options Menu; Dp Clean Menu - Edwards GXS Series Instruction Manual

Table 36 Booster pump start options menu
Option
Booster start mode
Booster controller if in Time
Delay Mode
Booster start delay
* Scroll through the options by pressing the UP/DOWN keys. Press ENTER to accept the
new setting. Press CANCEL to exit back into the Booster pump start options menu.
Press the UP/DOWN keys to select the new settings and press ENTER to accept or
CANCEL to exit back to the Booster pump start options menu.

9.4.9 MicroTIM options menu

Scroll by pressing the UP/DOWN keys. Press ENTER to open a sub menu or CANCEL to
exit back to the Set sequences menu.
Table 37 MicroTIM options menu
Option
Set MicroTIM
Input 2
Set MicroTIM
Output 4
Use the UP/DOWN arrow to change and enter to select.

9.4.10 DP clean menu

Scroll by pressing the UP/DOWN keys. Press ENTER to open a sub menu or CANCEL to
exit back to the Set sequences menu.
M58800880_H - Pump display terminal
Text on PDT line 2
BP Start Mode
BP delay after..
BP start delay..
Text on PDT line 2 Options on PDT line 2 after pressing Enter
Input 2 ...
Output 4 ...
Page 126
Options on PDT line 2 after pressing
Enter
Select from:
Manual
Time Delay
Select from:
Dry pump
Inlet isolation valve
Range 1-200 seconds*
Select from:
Green Mode
Booster
Isolation Valve
PID Enable
Second speed control
Select from:
Isolation Valve
Warning
Booster
N Flow
2
Water Flow
Exhaust Pressure
Control status
On Process State
Semicon Outputs