Storage, Transportation And Disposal; Storage Of The Stc-U; Transporting For Repair Or Overhaul - Edwards STP-XF1303 Series Instruction Manual

6

STORAGE, TRANSPORTATION AND DISPOSAL

6.1

Storage of the STC-U

When planning not to use the STC-U over a long period (more than a few months), follow the
precautions below:
1. Store the STC-U in a horizontal position.
2. DO NOT store the STC-U in the following areas:
• Areas of high humidity.
(if it must be stored in a place of high humidity, insulate it from the outside and use a
dehumidifying agent.)
• Areas prone to temperature extremes. High temperatures of more than 55 ºC (131 ºF), and low
temperatures of less than -25 ºC (-13 ºF).
• Areas which will be subjected to direct sunlight.
• Areas where corrosive gases may exist.
• Areas subjected to water/dampness.
• Areas subjected to excessive dust.
• Areas with insufficient ventilation.
• Areas subjected to strong magnetic and electric fields or radiation.
• Areas subjected to electric noise and vibration.
6.2

Transporting for repair or overhaul

Ensure you follow the "Return Procedure" to prevent an accident during the
Edwards will not be responsible for any damage or problems that may occur when returning
Always contact Service office before returning the STC-U for repairs, overhaul or other purposes.
When returning the STC-U to Service office, use the original packing to prevent external damage. If
you do not have the original packing, use similar or superior packaging material.
"Return Procedure" and the "Malfunction Information" are in the end of the Instruction Manual. When
additional sheet is needed, contact Service office.
Note : When returning the STC-U to Service office, fill in the necessary items in the "Return
Declaration" and fax it to Service office.
STC-U eTMS unit
WARNIG
transportation, repair or overhaul.
CAUTION
the STC-U.
6
MT-92E-A01-C
Page 35