Setting The Status Screen To Automatically Scroll; Change The Normal Menu Display; Figure 57 Pdt Menu Items - Edwards GXS Series Instruction Manual

Figure 57 PDT menu items

9.5.1 Setting the status screen to automatically scroll

The status display can be made to automatically scroll through its display items using the
auto scroll menu item. The delay between refreshes is set using the scroll delay menu
item.

9.5.2 Change the normal menu display

The normal display on the PDT can be customised to display any status item. The normal
display consists of two pages each of two lines so there are four configurable lines.
When in the select parameter menu the bottom line of the display shows what will be
displayed if that option was selected.
M58800880_H - Pump display terminal
Page 134