Edwards GXS Series Instruction Manual page 27

Table 9 Electrical connections
Description
Mains connection
Refer to Installation on page 28 for the wiring diagram
PDT interface
Pin 1
Pin 2
Pin 3
Pin 4
Pin 5
System interface
Pin 1
Pin 2
Pin 3
Pin 4
Pin 5
Ethernet interface
EMS interface
External emergency stop switch
Pin 1 - supply, Pin 2 - return**
M58800880_H - Technical data
Mating connector description/external
supply rating
Refer to Table: Electrical data
mains connector fitted to each variant.
Connector is either:
Harting Han® K4/4-F finger safe 09 38 008
2
2703, 6-16 mm fine stranded wire (VDE
0295 class 5, refer to
according to VDE 0295), 8.9 mm maximum
insulation diameter
or
Harting Han® Axial Screw module 100 A (2
off required), part number of mating half
suitable for 10‑25 mm
2753 or 0914 002 2751 for 16‑35 mm
wire. Use fine stranded wire (VDE 0295
class 5, refer to Table: Wire assembly
according to VDE 0295).
or
Harting Han® Axial Screw module 200 A (3
off required), part number of mating half
suitable for 25‑40 mm
2763 or 0914 001 2762 for 40‑70 mm
wire. Use fine stranded wire (VDE 0295
class 5, refer to Table: Wire assembly
according to VDE 0295).
XLR type 5-way plug
XLR type 5-way plug
Standard RJ45 type or Neutrik
®
EtherCon RJ45
XLR type 6-way plug
Page 23
for the
Table: Wire assembly
2
wire is 0914 002
2
2
wire is 0914 001
2
®
Internal supply
rating
24 V d.c. 0.2 A
0 V
24 V
Transmit data
Receive data
Not used
24 V d.c. 0.75 A*
0 V
24 V
Transmit data
Receive data
Not used
(IEEE802.3i
10 Base T Ethernet)
24 V d.c. 100 mA