Accessories - Edwards GXS Series Instruction Manual

involved in the service of your equipment. The hazard information also lets us select the
correct procedures to service your equipment.
We provide instructions for completing the form in the Declaration of Contamination of
Vacuum equipment and Components – Procedure HS1.
If you are returning a vacuum pump, note the following:
▪ If a pump is configured to suit the application, make a record of the configuration
before returning the pump. All replacement pumps will be supplied with default
factory settings.
▪ Do not return a pump with accessories fitted. Remove all accessories and retain
them for future use.
▪ The instruction in the returns procedure to drain all fluids does not apply to the
lubricant in pump oil reservoirs.
Download the latest documents from www.edwardsvacuum.com/HSForms/, follow the
procedure in HS1, fill in the electronic HS2 form, print it, sign it, and return the signed
copy to us.
NOTICE:
If we do not receive a completed HS2 form, your equipment cannot be serviced.

7.3 Accessories

Table 26 Accessories
Description
Exhaust check valve kit NW40 for GXS160 and 250 systems
Exhaust check valve kit NW50 for GXS450 and 750 systems
Water flow monitoring kit*
Flow monitor 0 ‑ 60 slm
Flow monitor 0 ‑ 200 slm
Nitrogen flow switches:
Suitable for 0 ‑ 60 slm
Suitable for 0 ‑ 204 slm
External Evacuation System (EES) kits:
Suitable for GXS 160/1750**
Suitable for GXS with 2600 booster**
Suitable for GXS with 4200 booster**
Booster purge kits:
Suitable for GXS with 1750 or 2600 booster
Suitable for GXS with 4200 booster
PDT
MCM MicroTIM
Connector kit for the MCM MicroTIM
Virtual Display Terminal (VPDT)
Accessory modules:
M58800880_H - Service, spares and accessories
Page 77
Item Number
A50782000
A50790000
A50783000
A60027043
A60027044
A50633000
A50634000
M58825019
M58935019
M59845019
M56425030
M59845023
D37280700
D37360320
D37422802
D37488500