Second Speed Control; Profibus Interface - Edwards GXS Series Instruction Manual

Ethernet interface and
details of how to use the SIM protocol with a serial port.

9.10.4 Second speed control

A second speed setting can be configured using the PDT and used to control the speed of
either the booster or the dry pump.
The second speed setting can be enabled and disabled using the PDT from the
Command menu, using the SIM protocol or the MCM MicroTIM configured for speed
control. Refer to
information on how to configure the MicroTIM.

9.10.5 Profibus interface

It is possible to independently control the speed of both the dry pump and the booster
using the optional Profibus interface, available as an accessory. For more information,
refer to the Profibus instruction manual D39753880. The GSD file is available with us.
If using Profibus, ensure that the speed control is set to normal (default setting) for both
pump and booster.
M58800880_H - Pump display terminal
How to use SIM protocol with a serial port
How to set up the MCM MicroTIM using the PDT
Page 147
on page 155 for the
on page 156 for the