Display Menu - Edwards GXS Series Instruction Manual

Configuration
Domain Name...
* Press UP/DOWN keys to select Enabled or Disabled and press ENTER to accept or
CANCEL to exit back to the IP Configuration menu.
† For each digit setting press the UP/DOWN keys to set the digit, press ENTER to accept
and move to the next digit or CANCEL to move back to the previous digit. Pressing ENTER
at the end of the line will accept the new setting and exit back to the Set Clock menu.
Pressing CANCEL at the start of the line will cancel and exit back to the IP Configuration
menu.
Display only items press CANCEL to exit back to the IP configuration menu.

9.4.24 Display menu

Under the Setup menu. Scroll by pressing the UP/DOWN keys. Press ENTER to open a
sub menu or CANCEL to exit back to the Setup menu.
Table 48 Display menu
Display
Units...
Normal display (Selects the parameters displayed in Normal)
Auto Scroll
Scroll Delay
UNITS (units to display)
Scroll by pressing the UP/DOWN keys. Press ENTER to open a sub menu or CANCEL to
exit back to the Display attributes menu.
Table 49 Units
Parameter
Pressure...
Temperature...
Speed...
Active Gauge...
In each option, scroll through the units available by pressing the UP/DOWN keys. Press
ENTER to select the displayed units or CANCEL to exit back to the Units menu.
SELECT LINE (Normal display selection menu)
Scroll by pressing the UP/DOWN keys. Press ENTER to open a sub menu or CANCEL to
exit back to the Display attributes menu.
Table 50 Selection menu
Parameter
Top Page 1...
Bottom Page 1...
Top Page 2...
M58800880_H - Pump display terminal
Page 132
Display
(display only)
Key
(PSI/kPa/mbar)
(Centigrade/Farenheit/Kelvin)
(rpm/Hz)
(mBar/Torr/kPA)