Run The Booster Using Sim And Profibus; Run The Booster Using The Mcm Microtim - Edwards GXS Series Instruction Manual

9.15.2 Run the booster using SIM and Profibus

Refer to the SIM and Profibus manuals for information on how to control the booster
using these protocols.

9.15.3 Run the booster using the MCM MicroTIM

If controlling the booster independently using the MCM MicroTIM then Input 2 needs to
be configured to Booster. Refer to
page 156 for the instructions on how to configure the MCM MicroTIM using the PDT.
Once the Input 2 has been configured to Booster, Input 2 will start and stop the booster
independently of the dry pump.
M58800880_H - Pump display terminal
How to set up the MCM MicroTIM using the PDT
Page 159
on