Normal Menu; Status Menu - Edwards GXS Series Instruction Manual

NR in the data part of a parameter indicates no reading.
NP in the data part of a parameter indicates a parameter that is not present.

9.4.1 Normal menu

This menu is displayed when the PDT is first plugged into the pump, or accessed by
pressing the NORMAL button. Up to four parameters are displayed. Scroll by pressing
the UP/DOWN keys.
Table 29 Normal menu
Description
Serial Number
Control Holder
Dry Pump current
Booster current
By default, the four parameters displayed in the normal menu are as shown in
Normal
the PDT display

9.4.2 Status menu

Press the STATUS button to enter. Scroll by pressing the UP/DOWN keys. Press CANCEL to
exit back to the Normal menu.
If a device is not fitted the associated parameters will not be displayed. Parameters
displayed:
Table 30 Typical display
Description
Serial number
Control holder
Dry pump current
Booster current
Green mode state
Inlet isolation valve open/closed state
Dry pump stator reference temperature
Dry pump temperature
Dry pump exhaust stage temperature
Dry pump end cover temperature
Booster temperature
Booster end cover temperature
Nitrogen flow switch status
Dry pump power
Booster power
Dry pump speed in percent
M58800880_H - Pump display terminal
menu. It is possible to change the parameters displayed, refer to
on page 133.
Typical display
S/N 1234567
NONE IN CONTROL
DP CURRENT
MB CURRENT
Green Mode STATE
ISOL VALVE
TCS REF
DP TEMP
DP EXH STG
DP E/C TEMP
MB TEMP
MB EC TEMP
N2 Supply
DP POWER
MB POWER
DP SPEED
Page 122
Typical display
S/N 1234567
NONE IN CONTROL
DP CURRENT 1.1 A
MB CURRENT 1.1 A
Table:
How to set up
1.1 A
1.1 A
Off
Open
100 C
100 C
63 C
100 C
100 C
100 C
OK
1.1 kW
1.1 kW
100 %