Set Clock; How To Set Up The Pdt Display - Edwards GXS Series Instruction Manual

Parameter
Bottom Page 2...
In each option, the select parameter menu is opened, scroll through the parameters by
pressing the UP/DOWN keys. Press ENTER to select the parameter for display or CANCEL
to exit back to the Select line menu.

9.4.25 Set clock

Under the Setup menu. Press ENTER to change the date and time displayed or press
CANCEL to exit back to the Setup menu.
For each digit setting press the UP/DOWN keys to set the digit, press ENTER to accept
and move to the next digit or CANCEL to move back to the previous digit. Pressing
ENTER at the end of the line will accept the new setting and exit back to the Set Clock
menu. Pressing CANCEL at the start of the line will cancel and exit back to the Setup
menu.

9.5 How to set up the PDT display

The configuration options for the PDT are stored in the PDT itself and are not associated
with the pump that the PDT is connected to. This means the user can transfer a PDT
between pumps and keep the same settings. It also means that different units could be
displayed on two PDTs connected to the same pump.
The following PDT menus are used to configure the PDT display.
M58800880_H - Pump display terminal
Page 133