Figure 69 Ethernet Menu Items - Edwards GXS Series Instruction Manual

M58800880_H - Pump display terminal
Note:
If the pump is set to DHCP mode it will not be visible through a router. If operation
through a router is required then use static address mode. The pump does not require
NTP, DNS or SMTP server addresses to be set to function correctly. A gateway address is
only required if working with a router. If working in static address mode then you need to
provide the IP address, the address mask and the gateway address.
The following menus are used by the PDT to configure the Ethernet port:

Figure 69 Ethernet menu items

Page 152