Check The Wheel Drives For Oil Leaks; Check The Condition Of The Antistatic Ribbon - Linde E 20-02 Operating Instructions Manual

Inspection and maintenance every 500 to 1000 hours or annually

Check the wheel drives for oil leaks

NOTE
Both wheel drives can only be checked for leaks with the
front wheels removed.
- Jack up the truck at the front left or right-hand side.
- Remove the front wheels.
- Inspect the oil leaks on the left and right wheel drives at the
filler, drain and level plugs, the housing cover and at the
end of the drive shafts for oil leaks.
NOTE
Contact your authorised distributor in case of leaks.
76

Check the condition of the antistatic ribbon*

- Check the antistatic ribbon underneath the frame bottom
for security and wear.
- Replace a damaged antistatic ribbon.
NOTE
The antistatic ribbon must always remain in contact with
the ground.
* Option
e336-02/31
e3363416
Maintenance