Opening Screen; Main Menu - Comtech EF Data CDM-600 Operating Instructions Manual

CDM-600 Satellite Modem
Front Panel Operation
6.2

Opening Screen

This screen is displayed whenever power is first applied to the unit:
COMTECH
TURBO: TPC/LDPC
For units manufacured after February 2005 with the extended IF bandwidth feature:
COMTECH CDM-600(E)
TURBO: TPC/LDPC
Press any key to go to the Main Menu screen. (Note: a REF WARMING message may be
seen at this point - see Section 6.3.1.8.)
6.3

Main Menu

SELECT: CONFIGURATION
MONITOR
The following choices are presented:
CONFIGURATION
TEST
INFORMATION
MONITOR
STORE/LOAD
UTILITY
ODU
(Outdoor Unit)
FAST
(Fully Accessible System
Topology)
IMPORTANT
CDM-600 OPEN NETWORK MODEM
OPEN NETWORK MODEM
STORE/LOAD
Permits the user to fully configure the modem.
Permits the user to configure the modem into one of several Test
modes.
Permits the user to view information on the modem, without
having to go into the Configuration screens.
Permits the user to monitor the current status of the modem and
view the log of stored events for the modem.
Permits the user to store and retrieve up to 10 different modem
configurations.
Permits the user to perform miscellaneous functions, such as
setting the Real-Time Clock, adjusting the display brightness,
etc.
Permits the user to monitor and control a Comtech EF Data RF
Transceiver, if connected.
Permits the user to configure different options, for extended data
rates, interfaces, etc. Contact the factory for details.
The actual choices displayed in the sub-menus may vary according
to which FAST options have been enabled. Where a FAST option
affects a menu, this is shown in the descriptive text.
6–5
S/W VER 2.0.1
S/W VER 2.0.1
TEST INFORMATION
UTILITY ODU
Revision 7
MN/CDM600.IOM
FAST